Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM13)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x385750443352
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010038575044 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM32)
Build ID: MRA58K
Display ID: WF581MR.JF.IT60.M0.F.GAL1SAG1.B15.0719.V3.02
Version: 6.0
Build Date: 2016年 07月 19日 星期二 21:43:15 CST
Build Date: 1468935795
Model: i-T60
Brand: i-T60
Device: T60
Manufacturer: T60
Mediatek Version Release: alps-mp-m0.mp1-V2.34_droi6580.we.m_P16
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
IMEI[1]: 358831171584291
IMEI[2]: 358831171584309
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x1000
Start procesing nvram
IMEI[1] from NVRAM: 358831171584291
IMEI[2] from NVRAM: 358831171584309
Start procesing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start procesing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start procesing lk ......
Start processing boot
Start processing recovery
Start procesing logo ......
Start procesing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start procesing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start procesing secro
Start procesing system
Reading: BEGIN: 0xa800000 - LEN: 0xc0000000
Backup cache disabled, we will skip it....
Backup userdata disabled, we will skip it....
Saved to : C:\Users\babu\Documents\Android_MTK\firmware_backup\MT6580_S00_EMMC_MRA58K__6.0_i-T60_i-T60_358831171584291_358831171584309_01_20_2017_02_27_45
Wait untill phone will start charging.
All done.
Whatsapp+IMO-00971551644035
Skype - dusto_babu
How to Flash Stock Firmware ROM (Flash File)
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile
